Skip to main content

Livee Lid LIVEELIDYELLOW

livee-lid-800
livee-lid-800livee-lid-2livee-lid-1livee-lid-3
R 1 150 each Weight: 1 kg
Width: 40 cm
Length: 40 cm
Height: 10 cm


The add to cart button will appear once you select the values above

Livee Lid GEN 3

NO full Lids No Drilling!!!!! Livee Lids have been developed by Anglers for Anglers! One of the most irritating things that can happen on a Fishing Jetski is that you spend time catching Live Bait and then one of your fish does and contaminates the water which causes your other Live Baits to die. Thats one of the great advantages of the Livee Lid you can see your Live Bait much easier now through the increased surface area and clear lid.No more loosing the screw on lid. No more fumbling to unscrew the lid you simply just turn the catch and open or close the clear perspex lid with one hand.

The best way is the easy way! TheLivee Lid Way!

Your solution for your live well on a jet ski.

Have you ever battled to get the lid off your capsize bottle while juggling a full string of mackerel? Or realised it’s gone when you need to close it again? I have!

Livee Lid is the answer to ending your frustrations. This registered design (A2021/00966 & F2021/00967) was developed for jet ski fishermen and all those who utilise a capsize bottle as a live well. Livee Lid creates easy access to your live bait and the high-quality Perspex lid allows great visibility so monitoring the health of your live bait is as easy as having a look.

This solution is an affordable alternative to many more complex and expensive live wells available, plus it’s a quick and simple DIY installation process. 

Any questions whatsap Mick 072 938 1769

Livee Lid Installation

 

WHAT YOU NEED

Drill

4.8mm Drill Bit

Jigsaw

Keyhole saw

Pop Riveter

4 X 4.8mm Pop Rivets

STEP-BY-STEP

  1. Remove all pipework and any restraints holding capsize bottle.
  2. Remove capsize bottle from cage.
  3. Mark a cut line just below the top curve of bottle.
  4. Cut all the way around.
  5. Drop in the Livee Lid.
  6. Drill and pop rivet to secure Livee Lid to capsize bottle.
  7. Drill new holes for pipework and overflow.
  8. Replace in cage.
  9. Replace pipework and you are done.
  10. GO FISH! 

Watch the 2 min video to see how easy it is. https://livee-lid.co.za/.cm4all/uproc.php/0/.Livee-Lid_Installation.mp4/video.mp4?_=17a62945088

There are various makes of capsize bottles and cages are often custom-built. We have solutions for all of these so don’t hesitate to give us a shout should your specs differ!  

List of the comments:
No comments have been posted yet.
You must be registered in order to post a comment

Other Jetski Fishing Products you may like

Results 1 - 20 of 238

You have no rights to post comments....Contact Codfather